GF-800-1100 Dry Laminating Machine
The drying tunnel of this machine adopts segmented constant temperature hot air drying, the internal heat conduction roller is linked with the main machine, and the heating roller is heated by heat conduction oil medium. Air expansion shaft is adopted, and the winding tension is controlled by PLC. Double inverters control the synchronous tension of the two motors.
This machine integrates light, electricity and gas,
with reasonable design, compact structure, high
degree of automation, simple operation, stable
performance, and high product qualification rate.
The drying tunnel of this machine adopts segmented constant temperature hot air drying, the internal heat conduction roller is linked with the main machine, and the heating roller is heated by heat conduction oil medium. Air expansion shaft is adopted, and the winding tension is controlled by PLC. Double inverters control the synchronous tension of the two motors.
1. Double frequency conversion speed regulation.
2. Gluing method of anilox roller.
3. Single station retracting and unwinding rack.
4. Glue rewinding and unwinding photoelectric correction.
5. The film tension in the drying tunnel adopts floating roller to compensate the constant tension.
6. Unwinding tension is controlled by magnetic powder brake.
7. The winding tension is controlled by a torque motor.
8. Double-layer pneumatic open drying tunnel.
9. Four-stage constant temperature hot air drying.
10. The composite roller is heated by heat-conducting oil medium.
11. The guide roller in the drying tunnel is linked with the host. 12. PLC man-machine interface control
Main technical parameters
The drying tunnel of this machine adopts segmented constant temperature hot air drying, the internal heat conduction roller is linked with the main machine, and the heating roller is heated by heat conduction oil medium. Air expansion shaft is adopted, and the winding tension is controlled by PLC. Double inverters control the synchronous tension of the two motors.
1. Double frequency conversion speed regulation.
2. Gluing method of anilox roller.
3. Single station retracting and unwinding rack.
4. Glue rewinding and unwinding photoelectric correction.
5. The film tension in the drying tunnel adopts floating roller to compensate the constant tension.
6. Unwinding tension is controlled by magnetic powder brake.
7. The winding tension is controlled by a torque motor.
8. Double-layer pneumatic open drying tunnel.
9. Four-stage constant temperature hot air drying.
10. The composite roller is heated by heat-conducting oil medium.
11. The guide roller in the drying tunnel is linked with the host. 12. PLC man-machine interface control
Main technical parameters
| Type | GF-800 | GF-1100 |
| Compound width | 800mm | 1100mm |
| Unwinding diameter | 600mm Barrel core 76mm | 600mm Barrel core 76mm |
| Rewinding diameter | 800mm | 800mm |
| Mechanical speed | 120m/min | 120m/min |
| Heating range | room temperature -120℃ | room temperature -120℃ |
| Total power | 58Kw | 68Kw |
| Dimensions | 9500x2300x3100mm | 9500x2600x3100mm |
| Machine weight | 5000Kg | 6000Kg |